From the perspective of my staff actually using the thing, the main downside is that the hot water dispenser is locked for the part of the brew cycle where no additional water will be used. I could set the drip delay to a minimum value to work around that, but that would unlock the brew baskets early and not have a realistic count down to when they can actually use the coffee that's brewing so I'd rather not make that change. Aside from that the new one is easier for staff to use.
New brewer has some nice changes and some not so nice changes. Programming the thing is worse as the touch sliders don't have step change controls (at least not discoverable ones) so I need a compatible stylus (which I could thankfully find) to get the values set precisely where I want them. On the plus side, there's bypass which I'm not currently using but have sometimes wished that the old one had it and if we need to we could move from 3L airpots to 1 gallon now.
A test batch of decaf with the regular settings I came up with resulted in something that tastes the same as what staff brewed by hand just before the new machine got installed so it looks like I don't have to do anything there yet. It'll be a thing to keep an eye on, though, as it's not uncommon for me to need different settings for decafs. At some point I'll also want to bring in the refractometer to double check strength.
Regular coffee out of the new brewer is now delicious. I did need to make some programming changes as the default settings weren't great for my coffee. Next is seeing if I still need a separate setting for decafs.
The main cause for concern with the new brewer was that the wiring diagram in the manual does not match the physical reality of the machine (the diagram sticker on the inside of the machine is a little better and cross checking that against the older brewer had me reasonably confident that I was doing the right thing wiring that up), but the water inlet isn't leaking, the one solenoid I've checked is working, and it's heating up so I think I've done it right.
An already bad looking week now looks rather worse. Was called in several hours early because apparently the coffee brewer's boiler developed a leak overnight. This is something that is in theory repairable, but the part+repair costs close enough to a whole new brewer so until that arrives and gets installed we're brewing by hand.
Got a little more work on Typica finished tonight. Small feature improvement and small code size reduction (and fewer lines needed in code I know I still need to write later). The upcoming week doesn't look good for further progress on that but I've got a list of small things that I can try to deal with.
Today's spam is particularly tone deaf. I do not believe for 1 second that 2 different people have written a near identical pitch for a new web site design and think they're going to make a several thousand dollar sale on a 2 decade old free software project that has never finished a year fiscally in the black. (Not that the details of the emails even make sense as something that might be even remotely desirable if I had the budget for that.)
Car repairs were faster than expected. Had I known they'd get to it as fast as they did I would have just waited for it there (trunk latch stopped latching so I've been driving around with some primary wire [it was what I had to work with when the problem started] tied inside so that it at least looked close enough to closed that other drivers wouldn't honk at me).
I seem to do this about once every 3-5 years (modifying someone else's Python, generally having no idea what I'm doing, but making it work in the end).
Needed a tool, didn't want to write it myself, found something that's almost what I needed, modified the Python to add the missing feature in a hacky works for me but would be totally inappropriate to upstream way.
I don't know Python but I can read the code, search for documentation, make reasonable guesses, see what the error messages say, &c.
Author of Typica software for coffee roasters.